VANQUISH 540

It is the default general find mode where it searches for all precious and non-precious metals indiscriminately.

Note:The user can customize the appropriate find mode by adjusting the appropriate settings within the device software program.

Target ID

• The digital target ID is a number within the range (-9 to 40) displayed on the digital device’s screen, related to incoming signals reflected from the metal target buried underground.
• The target ID gives the prospector an idea of the nature of the metal type of the buried object. The target ID number ranges from -9 to 40. The target ID is used to distinguish one target type from another particular type, as follows:
  1. Target ID range 1 to 40 denotes non-ferrous metal objects such as precious metals such as silver, copper or gold.
  2. Target ID range 1 to 40 denotes non-ferrous metal objects such as precious metals such as silver, copper or gold.

Discrimination Bar

• The device screen includes in the upper section a rectangular bar divided into sectors marked by certain symbols indicating the type of metal target within this sector corresponds to 50 values of the target ID range, grouped in 5 regions or sectors.
• The detected targets appear as illuminated sectors. Rejected targets (undiscovered or “empty”) appear to be illuminated or dimmed.
• The discrimination bar includes the following sectors:
  1. Ferrous metals sector (target ID range from -9 to 0), e.g. iron nail – iron wire.
  2. A sector of metal with very weak electrical conductivity (within the target ID range from 1 to 10), for example: very small nuggets of raw gold or foils of very small thickness.
  3. Low conductivity metal sector (target ID range 11 to 20), e.g. aluminum or pure gold.
  4. High – conductivity metal sector (target ID range 21 to 30), e.g. copper or bronze coins.
  5. Weak metal sector with very high electrical conductivity (target ID range from 31 to 40), e.g. silver coin or teaspoon of silver.

Iron Bias

• The Iron Bias feature, the first of its kind in a metal detector, allows you to adjust ferrous metal detection settings between two values: High or Low.
• This enables the prospector to adjust the field of ignoring some iron metal targets that the device may ignore, enabling better results by discovering valuable targets and ignoring scrap.
• Easy program and user-friendly interface.
• Vanquish features an easy-to-use one-screen software that displays information and indicators all on the crystal screen at the same time.
• The control panel buttons at the bottom and the sides of the screen can change many basic or advanced settings depending on the purpose of the search and various factors.

Examples of configurable settings include

Select the find mode from the three modes mentioned previously.

• Change the operating frequency between one of five frequencies or activate the Multi-IQ option.
• Activate All-Metal mode for general all-metal search (via a special button on the control panel)
• Change and adjust the sensitivity settings: Activate Pin Pointer mode for precise positioning of detected metals via a special button.
• Activate the backlight of the screen red light helps to read the screen when searching in the dark or in places with low light, for example within a cave Set a range of advanced settings such as noise cancellation, ground balance, volume adjustment, and target sound tone.

Modern Practical Design

• Equipped with high-quality, lightweight materials, the streamlined design is attractive and can be folded to a minimum to make it easy to carry and use in search fields.
• The search coils are waterproof up to 1 meter under water, and the main unit (control box) is waterproof and included with rain cover.